BlueVPN+

Click to rate this post!
[Total: 0 Average: 0]
  • App :BlueVPN+
  • 版本 :2.9
  • 系统 :4.0.3 及更高版本
  • 提供者 :Mirko Solazzi
  • 开发者 :Home

Google Play 下载

BlueVPN+介绍 :

BlueVPN+

This program opens a VPN connection through the bluetooth or USB channel and allows to navigate the internet without a WiFi or a built-in 3G module. It requires one of:
– Android smartphone/tablet with BlueDUN installed and running
– GPRS phone with Dial-Up Networking (DUN) support
– USB Stick with 3G or PSTN Modem

NO ROOTING NEEDED!!

This app is compatible with Android 4.0 , 4.1 , 4.2 , 4.3 and 5.0. It doesn't work with Kit Kat versions (4.4.*) due to a VPN issue. PLEASE DON'T WRITE COMMENTS ABOUT THIS VERSIONS!

This app works ONLY IF your device can manage VPN connections, in particular if the TUN.KO module is present. This module strictly depends on the hardware and must be compiled specifically for it. Some manufacturers prepare the firmware without re-compile that module or they even remove the file, so, it is not possible to open a VPN and not possible to use apps for the VPN (like OpenVPN or DroidVPN); please take a look to this link:

https://play.google.com/store/apps/details?id=com.aed.tun.installer

INSTALLATION:
1. Create the BT pairing between this client device (with BlueVPN+ installed) and the host device or simply connect the USB stick
2. Make sure you have a valid internet connection and the BT-DUN profile on host; if necessary install the BlueDUN app
3. In case of direct modem connection (no Android phones) or USB modem, insert in the setting panel the dial phone number, the access point and the other connection parameters
4. Some 3G stick modems require the "Modem compatibility" option enabled

Normal use:
1. Activate the DUN service / open the BlueDUN app on host device or plug the modem USB stick
2. Open the BlueVPN+ app on client, click the BT host name or the USB device name in the list
[ First time you open the connection, you need to confirm the security alert for VPN and USB interfaces (x2)]
3. While BlueVPN+ is connected you can open a browser and navigate the internet through the bluetooth tethering or directly with USB modem

NOTE – there are applications that cannot retrieve network data from the VPN connection due to an Android bug (http://code.google.com/p/android/issues/detail?id=33666), please refer to the following list:

WORK FINE:
– GMail (Only read messages, no synchronization)
– Email [ POP3 / IMAP ]
– Google+
– Facebook
– Twitter
– You Tube
– Google Earth
– Google Maps ( until version 6.14 )
– Google Play (browse only)
– Google Goggles
– Kindle app
– eBay app
– SoundHound
– Web Navigation (Chrome/Firefox/Dolphin…)

DON'T WORK:
– Google Play download
– Skype
– Zedge
– Tune In

The above list may change if the apps change their behaviour after an upgrade.

Tested with Android tablets:
– Nexus 7
– Acer Iconia Tab A500
– Samsung Tab 7 / 10.1 work fine with BT connection; for USB modems you need a OTG cable and a low power consumption USB stick or an additional powered USB hub or a battery pack like the tekkeon mp1800.

and external devices:
– Atlantis V.90/V.92 USB PSTN Modem

– Hauwei USB stick 3G Modems ( E172 , E1800 )

– BlackBerry phones (9300,Torch 9800, Bold 9900)
– Nokia phones (2730, 5800 , E5, E65, E66, N95 ,N8-00 Belle, C60-01)
– Samsung phones (SGH-L760)

If you have experience with different devices please let us know!

NOTE: As it is impossible to test all devices, in case of no-working, the money will be refunded even after the 15 minutes allowed by Google (send a refund request by mail)

I don't provide support if you add negative comment on Google Play before contacting me by email这个程序打开通过蓝牙或USB信道的VPN连接,并允许以导航因特网而不WiFi或一个内置3G模块。它要求中的一项:
  – Android智能手机/平板电脑BlueDUN安装并运行
  – GPRS手机拨号网络(DUN)支持
  – USB棒与3G或PSTN调制解调器

NO生根的必需!

这个程序是采用Android 4.0,4.1,4.2,4.3和5.0兼容。它不与奇巧的版本(4.4。*)由于VPN问题的工作。请不要写评论关于本VERSIONS!

这个程序只有当你的设备可管理的VPN连接,特别是如果TUN.KO模块存在。此模块严格依赖于硬件,而且必须为它特别编译。一些制造商准备无固件重新编译该模块,或者它们甚至删除文件,所以,这是不可能打开VPN,而不是可以使用的应用程序为VPN(如OpenVPN的或DroidVPN);请看看这个链接:

https://play.google.com/store/apps/details?id=com.aed.tun.installer

安装:
1.创建此客户端设备之间的配对BT(安装BlueVPN +)和主机设备或只需连接USB棒
2.确保你有一个有效的网络连接和主机BT-DUN轮廓;如果有必要安装BlueDUN应用程序
3.如果直接连接调制解调器(没有Android手机)或USB调制解调器,在设置面板插入的电话号码,该接入点和其他连接参数
4.一些3G调制解调器棒需要“调制解调器兼容性”选项启用

正常使用:
1.激活DUN服务/打开主机设备上的应用程序BlueDUN或插入调制解调器USB棒
2.打开客户端BlueVPN +应用程序,请单击列表中的BT主机名或USB设备名称
    [第一次打开的连接,你需要确认安全警报的VPN和USB接口(×2)]
3.在BlueVPN +连接,你可以打开一个浏览器,并通过蓝牙圈养与USB调制解调器浏览互联网或直接

注意 – 有应用程序无法检索从VPN连接的网络数据,由于一个Android的bug(http://code.google.com/p/android/issues/detail?id=33666),请参阅下面的列表:

做工精细:
– GMail的(只读邮件,没有同步)
– 电子邮件[POP3 / IMAP]
– Google+的
– Facebook的
– 微博
– 你管
– 谷歌地球
– 谷歌地图(至6.14版本)
– 谷歌播放(只能浏览)
– 谷歌护目镜
– Kindle应用程序
– 易趣应用程序
– SoundHound
– 网站导航(铬/火狐/海豚…)

不工作:
– 谷歌播放下载
– Skype的
– Zedge
– 调

上面所列内容可能会改变,如果应用程序在升级后改变自己的行为。

测试了Android平板电脑:
  – 的Nexus 7
  – 宏碁ICONIA TAB A500
  – 三星Tab采用7 / 10.1做工精细用BT连接;对于USB调制解调器,你需要一个OTG线和低功耗的USB记忆棒或额外供电的USB集线器或类似tekkeon MP1800的电池组。

和外部设备:
  – 亚特兰蒂斯V.90 / V.92 USB调制解调器PSTN

  – Hauwei USB记忆棒的3G调制解调器(E172,E1800)

  – 黑莓手机(9300,火炬9800,粗体9900)
  – 诺基亚手机(2730,5800,E5,E65,E66,N95,N8-00百丽,C60-01)
  – 三星手机(SGH-L760)

如果你有不同的设备经验,请告诉我们!

注:由于这是不可能的测试所有设备,如果没有工作的,这笔钱将退还,即使谷歌所允许的15分钟(发邮寄退款要求)

我不提供支持,如果您通过电子邮件联系我之前在谷歌播放增添负面评论

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用*标注